Setting Values Description
[Print quality] 2 [RIP resolution] (de-
fault [600x2400] dpi)
The RIP resolution can improve the readability
of fine details. When you print very thin, slan-
ted lines, for example in Chinese characters,
1200x1200 gives the best result. 600x2400 is
best suited for mainly horizontal and vertical
objects.
[Color profile] (default
[Normal])
You can use color profiles when you print col-
or images on a B&W printer. The selected col-
or profile determines how a color image is re-
produced in black and white.
• [Enhanced] is a color profile developed by
Océ that converts CMYK or RGB data into
different gray values in a contrast-balanced
way. When you select [Enhanced], the im-
ages will become lighter, softer and less
contrast-rich.
• [Normal] is a color profile developed by
Adobe
®
that converts color data into gray
values. When you select [Normal], the im-
ages will become darker and more contrast-
rich.
NOTE
You can also use your own color
profiles. Make the required settings
in the Settings Editor.
[Binding]
Setting Values Description
[Binding] [None] Here you can define the required number of sta-
ples. Furthermore you can define where you want
the staples with the [Location] option.
The available locations for one staple:
• [Top left]
• [Top right]
• [Bottom left]
• [Bottom right]
The available locations for two staples:
• [Left edge]
• [Top edge]
• [Bottom edge]
• [Right edge]
Check the preview for the result of the selection.
[1 staple]
[2 staples]
Description of the print job settings that you can change on the control panel
140
Chapter 9 - Carry out print jobs
Océ VarioPrint 6000 line
To Next Page
Loading...
