161
Detailed Description of Services
Section 6-4
7014 Operation error
(7014)
The command cannot be executed because
EEPROM is currently being written.
Execute retries until the 7014 response code
is reset.
7015 Operation error
(7015)
The command cannot be executed during
reset (including startup).
7016 Operation error
(7016)
The command cannot be executed during
error latch status.
7020 Operation error
(7020)
The command cannot be executed in the cur-
rent control mode.
7021 Operation error
(7021)
The command cannot be executed because
the control switching conditions have not
been established.
7030 Operation error
(7030)
The command cannot be executed in the cur-
rent output mode.
7041 Operation error
(7041)
The command cannot be executed in manual
operation mode.
7042 Operation error
(7042)
The command cannot be executed in tuning
mode.
0000 Normal completion Processing was completed normally.
Response code Error name Cause
To Next Page
Loading...
Need help?
General
