Omron MX2 Series User Manual

7 Other Functions
7 - 34
Multi-function Compact Inverter 3G3MX2-EV2 User’s Manual (I666-E1)
1st control motor
2nd control motor
Setting item
H022
H222
Motor Parameter L
H023
H223
Motor Parameter Io
H024
H224
Motor Parameter J
H030
H230
Motor Parameter R1 (Auto-tuning Data)
H031
H231
Motor Parameter R2 (Auto-tuning Data)
H032
H232
Motor Parameter L (Auto-tuning Data)
H033
H233
Motor Parameter Io (Auto-tuning Data)
H034
H234
Motor Parameter J (Auto-tuning Data)
It is not possible to distinguish between the 1st and 2nd control functions on the display. Check the
ON/OFF status of each terminal to determine which control function is enabled.
During operation, attempts to switch between the 1st and 2nd control functions fail. Because switching
is enabled only during stop, the inverter will be switched after the operation is stopped.

Omron MX2 Series Specifications

General

Cooling Method	Fan cooling
Output Frequency Range	0.1 to 400 Hz
Control Method	V/f control, Sensorless vector control
Protection Functions	Overcurrent, overvoltage, undervoltage, overload, overheating, short circuit
Communication Options	Modbus RTU
Overload Capacity	150% for 60 seconds
Braking Unit	Built-in
Ambient Operating Temperature	-10°C to +50°C
Enclosure	IP20
Storage Temperature	-20°C to +65°C
Humidity	5 to 95% RH (non-condensing)
Altitude	Up to 1000m
Power Supply Voltage	200-240V AC
Input Voltage	3-phase 200-240V AC