4-3
Chapter 4. Advanced Setup
4
Advanced Setup
Example 2. Communication with 2 or More Access Points
Register all partner access point BSSIDs. In an example below, BSSIDs from AP-2 to AP-7 are to be
registered to AP-1. Channels of all access points must be configured as the same. Up to 6 BSSIDs can be
registered to 1 access point.
The maximum number of access points which simultaneous AP-to-AP bridging is available is 7 (including
your own PC).
Example 3. Communication with 2 or More Access Points via Repeater
Register access point BSSIDs of the other part (partner) of communication. This is a combination of the
examples 1 and 2.
The maximum number of access points which simultaneous AP-to-AP bridging is available is 7 (including
your own PC).