Omron WE70-AP - Limiting Setup Screen Access

5-27
Chapter 5. Setup Menu
5
Setup Menu
5-4. Limiting Setup Screen Access
Specifying administrator's ID, password, and IP address can inhibit any change for wireless unit setup via a
WWW browser by others than the administrator.
If an administrator IP address is specified, only terminals with registered IP addresses can make access to a
setup screen of an access point.
Specify a fixed IP address to an access point to be used by the administrator.
Specifying administrator ID and password to a client (slave) can inhibit easy access to a setup screen by oth-
ers than the administrator.
<To Configure>
Setup on WE70-AP
(1) Click "Maintenance" menu.
• An "Administrator Setup" screen is displayed.
(2) Enter an IP address of PC used for the administrator to [Admin. IP setting
1] in the [IP setting for administrator ].
(Example: 192.168.0.5)
(3) To set an administrator password at the same time, enter an administra-
tor password with any alphanumeric character string (within 31 charac-
ters) in [Admin. password] and [Confirmation input] fields of [ID setting for
administrator].
(Input Example: uspass, Display Example: ••••••)
Entered character is displayed as "•(black circle)".
(4) Click <Apply>.
• Setup is now being enabled.
A screen asking user name and password will be displayed. Enter these
administrator ID and password.
Setup Screen
192.168.0.11
(User)
192.168.0.5(Administrator)
192.168.0.1
Wireless LAN Card
L
A
N
M
O
D
E
P
O
W
E
R
W
I
RE
L
E
S
S
W
E70
-
A
P
F
A
W
I
R
E
L
E
S
S
L
A
N
A
C
C
ES
S
P
O
I
N
T
WE70-AP
(Administrator)
(User)
The administrator of the registered IP Address makes an access using [ID] or [Password]