Opticon L-46X - Central Reading Functionality

Chapter-8
Read Options
L-46X User's Manual
100
1st
Central Reading
8.1.3
This function can be used to read a specific target code when multiple codes are closely positioned.
Only the code in the central portion of an image will be read, as shown below.
Item
Command
Description
Default
Central reading
[D00
Enable central reading;
read only a code at the center of aiming LED
[D0Z
Disable central reading; read within entire image

Examples of readable positions in central reading setting
Examples of unreadable positions in central reading setting
* When several codes are tightly packed, it is recommended to use the Trigger Repeat (See: 8.2.1) function to
Improve reading performance.