Opticon L-46X - Fixed USB-COM Port; Connection Method; COM to HID Output

Chapter-5
Interface
L-46X User's Manual
42
1st
Fixed USB-COM Port
5.2.4
This option enables fixed USB-COM Port number. The COM port number to which the USB connected
Windows PC is assigned will always be the same port number.
Item
Command
Description
Default
Fixed USB-COM Port
number and driver
selection
[EGC
Q0
Not to fix assigned COM port number

Q1
Fix assigned COM port number
* Fixed USB-COM Port settings will become active after a reboot and initialization of the scanner.
Connection Method 5.2.5
Connect to the host PC by following procedure.
1. Start the tool to serial communicates (emulator or UniversalConfig).
2. Connect to the COM port confirmed at 5.2.3 Connection.
3. For Command packet, refer to 3.1.1.
COM to HID Output 5.2.6
WIME (Windows .NET Application) allows to convert data received by the scanner via virtual COM
port (USB-COM) to HID-like and transfer to the application which has focus.
In case multi byte character is not output correctly with USB-HID, this can be solved by using WIME.
Scanner
USB
-
COM
Communication
Output to focused application
as character information
Windows PC
Scanner
USB-COM
Communication
Output to focused application
as character information