Opticon L-46X - Scanner Operation Transitions

Chapter-2
Before Using
L-46X User's Manual
11
1st
Operation Transition
2.7
Following are the operation status transition of the scanner.
Operation Transition Diagram 2.7.1
Status
Description
Read
Acquiring image and reading is in progress with the warm white LED and
green aiming LED on.
Standby
Can start reading by serial command or pulling trigger.
Auto trigger
Detecting target by image. Status LED turns on in light blue and warm white
LED slightly on.
Auto trigger sleep
When no detection continues for 5 seconds (default setting) while in the auto
trigger mode, scanner shift to auto trigger sleep which detects with the warm
white LED turned off.
Operation current transition (USB-HID)
Status
Typ.
Unit
Reading
340
mA
Auto trigger standby
160
mA
Standby
55
mA
Power-OFF
Standby Auto trigger
Read
Auto trigger
sleep
Power applied
Pull trigger
or
Send trigger command
No detection for
the set time
(Default: 5 seconds)
Detect
target
Remove from the stand
Attach to the stand
Reading complete
or
Complete trigger
Detect target