range Pi User Manual Copyright reserved by Shenzhen Xunlong Software Co., Ltd
280
1) By default, the Linux image does not have the configuration to open the eDP screen.
If you need to use the eDP screen, you need to open it manually.
2) The steps to open the eDP screen configuration are as follows:
a. First run orangepi-config, ordinary users remember to add sudo permission
orangepi@orangepi:~$ sudo orangepi-config
b. Then select System
c. Then select Hardware
d. Then use the arrow keys on the keyboard to navigate to edp, and then use the
space to select
To Next Page
Loading...