range Pi User Manual Copyright reserved by Shenzhen Xunlong Software Co., Ltd
292
Downloading the orangepi-build code through the git clone command does not
require entering the user name and password of the github account (the same is true
for downloading other codes in this manual), if the Ubuntu PC prompts the user to
enter the github account after entering the git clone command The name and
password are usually entered incorrectly in the address of the orangepi-build
warehouse behind the git clone. Please check the spelling of the command carefully,
instead of thinking that we forgot to provide the username and password of the
github account.
2) The u-boot and Linux kernel versions currently used by the development board are as
follows
The branch mentioned here is not the same thing as the branch of the
orangepi-build source code, please do not confuse it. This branch is mainly used to
distinguish different kernel source code versions.
Currently, the Linux5.10 bsp kernel provided by RK is defined as the legacy
branch. If the mainline kernel is supported in the future, a current branch will be
added.
To Next Page