range Pi User Manual Copyright reserved by Shenzhen Xunlong Software Co., Ltd
356
4) After the compilation is complete, the following information will be printed
********rkImageMaker ver 2.1********
Generating new image, please wait...
storage is spinor
Writing head info...
Writing boot file...
Writing firmware...
Generating MD5 data...
MD5 data generated successfully!
New image generated successfully!
********rkImageMaker ver 2.1********
Merging storage firmware, please wait...
storage count = 2
adding spinor_update.img...ok
adding pcie_update.img...ok
Merging firmware success.
Making update_spi_nvme.img OK.
Make update image ok!
/wspace3/RK3566/RK356X_Android11
5) The final image file will be placed in the rockdev/Image-rk3566_r/ directory. Among
them, update.img is the boot image that supports TF card and eMMC, and
update_spi_nvme.img is the boot image of NVME SSD
test@test:~/RK356X_Android11$ cd rockdev/Image-rk3566_r
test@test:~/RK356X_Android11/rockdev/Image-rk3566_r $ ls update*
update.img update_spi_nvme.img
To Next Page