Panasonic KX-NS300 - Page 238

Name Description Value Range Links
Packet
Sampling
Time (G.
711/G.722)
Specifies the time interval between
measurements (samples) of sound
data during a conversation. The
smaller this number, the higher the
quality of the transmitted sound.
20 ms, 30 ms, 40 ms,
50 ms, 60 ms
Feature Manual
References
5.2.2 SIP (Session
Initiation Protocol)
Extension
Packet
Sampling
Time (G.
729A)
Specifies the time interval between
measurements (samples) of sound
data during a conversation. The
smaller this number, the higher the
quality of the transmitted sound.
20 ms, 30 ms, 40 ms,
50 ms, 60 ms
Feature Manual
References
5.2.2 SIP (Session
Initiation Protocol)
Extension
Remote Place (Location / P2P)
The Shelf, Slot, and Port for each item are displayed for your reference. For details, see Common
Programming Reference Items in 9.1 PBX Configuration—[1-1] Configuration—Slot.
Name Description Value Range Links
Extension
Number
(SIP
Username)
Specifies the extension number
(SIP Username) of the port.
Max. 5 digits
(consisting of 0–9)
Feature Manual
References
5.2.2 SIP (Session
Initiation Protocol)
Extension
Password Specifies the password used for
registering a SIP Extension to the
PBX. While it is possible to enter a
password manually for each SIP
Extension, you can copy the value
for Extension Number to
Password by clicking the Copy to
button. This parameter can only
be modified when the virtual SIP
extension port is set to OUS, and
the programmer must be in On-
line mode.
4–16 characters
(consisting of 0–9, a–
z, A–Z)
Feature Manual
References
5.2.2 SIP (Session
Initiation Protocol)
Extension
Connection Indicates the port status. To
change the status of the port, click
the desired cell in the column, and
then select INS or OUS for the
port. This option is only available
in On-line mode.
INS: The port is in
service
OUS: The port is out
of service
Fault: The port is not
communicating with
the network.
Feature Manual
References
5.2.2 SIP (Session
Initiation Protocol)
Extension
9.16 PBX Configuration—[1-1] Configuration—Slot—Port Property—V-SIPEXT
238 PC Programming Manual