Name Description Value Range Links
Phone
Location
Specifies the type of extension
connected to the port.
Local only: The
extension is located
on the same network
as the PBX (standard
configuration).
Remote + Local: The
extension is
accessing the PBX
remotely (Media
Relay Gateway).
Feature Manual
References
5.2.2 SIP (Session
Initiation Protocol)
Extension
Panasonic
SIP Phone
only
Enable this setting to allow only
P-SIP phones connect to the PBX.
Note
This setting cannot be
changed while Phone
Location is set to Local only.
If Phone Location is set to
Remote + Local, this setting
will be set to Yes (Only)
automatically.
Yes (Only), No
Feature Manual
References
5.2.2.4 Panasonic SIP
Phones (P-SIP)
P2P Group Specifies the peer-to-peer group. 1–32
PC Programming
Manual References
9.2.2 PBX Configuration—
[1-1] Configuration—Slot—
System Property—Site—
Main—P2P Group
Feature Manual
References
5.2.3 Peer-to-Peer (P2P)
Connection
P2P Group
Name
Indicates the selected peer-to-
peer group’s name (reference
only).
P2P Group Name
PC Programming
Manual References
9.2.2 PBX Configuration—
[1-1] Configuration—Slot—
System Property—Site—
Main—P2P Group
11.10 PBX Configuration—
[3-10] Group—P2P Group
Feature Manual
References
5.2.3 Peer-to-Peer (P2P)
Connection
FAX/T.38
The Shelf, Slot, and Port for each item are displayed for your reference. For details, see Common
Programming Reference Items in 9.1 PBX Configuration—[1-1] Configuration—Slot.
9.16 PBX Configuration—[1-1] Configuration—Slot—Port Property—V-SIPEXT
PC Programming Manual 239
To Next Page
Loading...
