Call Transfer Status—Transfer to specified telephone number 2, 3, 4, 5
(Selection/Other)
If "None" or "Call screening" is selected for Call Transfer Status—Selection, and the call could not be
transferred to the number specified in Call Transfer Status—Transfer to specified telephone number -
1, the call will be transferred according to these settings for this scenario, in numerical order of priority.
Note
• This sequence has higher priority than the alternate extension transfer sequence specified in 24.4 UM
Configuration—[5-4] System Parameters—Parameters— PBX Environment—Alternate
Extension Transfer Sequence (Up to 16 digits / [0-9 * # D R F T X , ;]).
• If "Call screening" is selected, the transfer destination will hear the call screening prompt before the
call is transferred.
Value Range
Other, Extension, Covering Extension
If "Other" is specified, enter a maximum of 32 digits consisting of 0–9, , and #.
Maintenance Console Location
8.1.1 Users—User Profiles—Advanced setting
Feature Guide References
3.2.2.6 Call Transfer Scenario
Incomplete Call Handling for No Answer
Specifies how the scenario handles a call when there is no answer.
Note
More than one option can be selected.
Value Range
Leave a Message: Allows the caller to record a message.
Transfer to a covering extension: Transfers the caller to a covering extension.
Page the mailbox owner by intercom paging: Pages the subscriber by intercom.
Transfer to operator: Transfers the caller to an operator.
Return to top menu: Lets the caller return to the top menu and try another extension.
Transfer to specified Custom Service Menu: Transfers the caller to the specified Custom Service.
Maintenance Console Location
8.1.1 Users—User Profiles—Advanced setting
Feature Guide References
3.2.2.6 Call Transfer Scenario
Incomplete Call Handling for Busy
Specifies how the scenario handles a call when the destination is busy.
PC Programming Manual 149
8.1.1 Users—User Profiles—Advanced setting
To Next Page
Loading...
