Panasonic KX-NS500 - Page 193

Jitter Buffer Delay Min. for Voice
Specifies the minimum size of the jitter buffer for voice communications.
Value Range
0–200 ms
Maintenance Console Location
9.2.2 PBX Configuration—[1-1] Configuration—Slot—System Property—Site
Jitter Buffer Delay Max. for Voice
Specifies the maximum size of the jitter buffer for voice communications.
Value Range
0–200 ms
Maintenance Console Location
9.2.2 PBX Configuration—[1-1] Configuration—Slot—System Property—Site
Jitter Buffer Delay Init. for Voice
Specifies the initial size of the jitter buffer for voice communications.
Value Range
0–200 ms
Maintenance Console Location
9.2.2 PBX Configuration—[1-1] Configuration—Slot—System Property—Site
Jitter Buffer Adaptation Period for Voice
Specifies the length of time that the jitter buffer is applied for voice communications.
Value Range
1000–65530 ms
Maintenance Console Location
9.2.2 PBX Configuration—[1-1] Configuration—Slot—System Property—Site
Jitter Buffer Delay Min. for FAX
Specifies the minimum size of the jitter buffer for fax communications.
Value Range
0–200 ms
PC Programming Manual 193
9.2.2 PBX Configuration—[1-1] Configuration—Slot—System Property—Site