Panasonic KX-NS500 - Page 194

Maintenance Console Location
9.2.2 PBX Configuration—[1-1] Configuration—Slot—System Property—Site
Jitter Buffer Delay Max. for FAX
Specifies the maximum size of the jitter buffer for fax communications.
Value Range
0–200 ms
Maintenance Console Location
9.2.2 PBX Configuration—[1-1] Configuration—Slot—System Property—Site
Jitter Buffer Delay Init. for FAX
Specifies the initial size of the jitter buffer for fax communications.
Value Range
0–200 ms
Maintenance Console Location
9.2.2 PBX Configuration—[1-1] Configuration—Slot—System Property—Site
Jitter Buffer Adaptation Period for FAX
Specifies the length of time that the jitter buffer is applied for fax communications.
Value Range
1000–65530 ms
Maintenance Console Location
9.2.2 PBX Configuration—[1-1] Configuration—Slot—System Property—Site
DTMF Detection Level for G.711A
Specifies the level of DTMF detection for the G.711A codec.
Value Range
-45– -12 dB
Maintenance Console Location
9.2.2 PBX Configuration—[1-1] Configuration—Slot—System Property—Site
DTMF Detection Level for G.711Mu
Specifies the level of DTMF detection for the G.711Mu codec.
194 PC Programming Manual
9.2.2 PBX Configuration—[1-1] Configuration—Slot—System Property—Site