NLP Setting
Specifies the NLP (Non-Linear Processor) setting to control echo sound quality.
Value Range
Disable, Weak, Normal, Strong
Maintenance Console Location
9.2.4 PBX Configuration—[1-1] Configuration—Slot—System Property—NSVM
AGC enable for Tx signal
Specifies whether AGC is activated or not for the Transmit signal.
Value Range
Disable, Enable
Maintenance Console Location
9.2.4 PBX Configuration—[1-1] Configuration—Slot—System Property—NSVM
AGC enable for Rx signal
Specifies whether AGC is activated or not for the Receive signal.
Value Range
Disable, Enable
Maintenance Console Location
9.2.4 PBX Configuration—[1-1] Configuration—Slot—System Property—NSVM
AGC reference level for TX signal
Specifies the AGC reference level for the Transmit signal.
Value Range
-50 dBm 0 - 0 dBm 0
Maintenance Console Location
9.2.4 PBX Configuration—[1-1] Configuration—Slot—System Property—NSVM
AGC reference level for RX signal
Specifies the AGC reference level for the Receive signal.
Value Range
-50 dBm 0 - 0 dBm 0
PC Programming Manual 223
9.2.4 PBX Configuration—[1-1] Configuration—Slot—System Property—NSVM
To Next Page
Loading...
