Maintenance Console Location
9.2.4 PBX Configuration—[1-1] Configuration—Slot—System Property—NSVM
The maximum allowable AGC gain for TX signal
Specifies the maximum allowable AGC gain for the Transmit signal.
Value Range
0 dB - 40 dB
Maintenance Console Location
9.2.4 PBX Configuration—[1-1] Configuration—Slot—System Property—NSVM
The minimum allowable AGC gain for TX signal
Specifies the minimum allowable AGC gain for the Transmit signal.
Value Range
-40 dB - 0 dB
Maintenance Console Location
9.2.4 PBX Configuration—[1-1] Configuration—Slot—System Property—NSVM
The maximum allowable AGC gain for RX signal
Specifies the maximum allowable AGC gain for the Receive signal.
Value Range
0 dB - 40 dB
Maintenance Console Location
9.2.4 PBX Configuration—[1-1] Configuration—Slot—System Property—NSVM
The minimum allowable AGC gain for RX signal
Specifies the minimum allowable AGC gain for the Receive signal.
Value Range
-40 dB - 0 dB
Maintenance Console Location
9.2.4 PBX Configuration—[1-1] Configuration—Slot—System Property—NSVM
SNS On/Off for PCM-to-Packet path
Specifies whether SNS is on or off for the PCM-to-Packet path.
224 PC Programming Manual
9.2.4 PBX Configuration—[1-1] Configuration—Slot—System Property—NSVM
To Next Page
Loading...
