Uploading Programmed Settings to the PBX
When programming in Off-line mode, clicking the icon will open a save dialogue box. Specify a location and
file name for the system data file. This file can then be uploaded to the PBX in On-line mode using the "File
Transfer PC to PBX" utility. For details, refer to 7.2.1 Utility—File—File Transfer PC to PBX.
Notice
• If the PC running the Off-line Web Maintenance Console is shut down, the Web browser is closed, or
the user logs out, any changes that have not been saved will be lost. Be sure to regularly save data
while programming.
• When you upload a system setting file to the PBX, all existing settings on the PBX will be overwritten
with the settings in the file, including settings you may not want to change. To change only specific
settings in Off-line mode, follow the procedure below:
1. Use the "File Transfer PBX to PC" utility in On-line mode to save a file with the PBX’s current
settings. For details, refer to 7.2.2 Utility—File—File Transfer PBX to PC.
2. Use the Open -Offline Mode command in the Programme Launcher to load the PBX system file
in Off-line mode.
For details, refer to Opening an Existing System Data File above.
3. Perform the desired programming in Off-line mode, and then click the icon to save the modified
system settings to your PC.
4. Log in to Web Maintenance Console in On-line mode, and then use the "File Transfer PC to
PBX" utility to upload the modified data to the PBX.
• When programming in Off-line mode, be careful when programming the following parameters:
– 20.1.2 UM Configuration—[1-2] Mailbox Settings—Full Setting—Mailbox Parameters—
Mailbox Password (Message Client)
– 20.1.2 UM Configuration—[1-2] Mailbox Settings—Full Setting—Notification
Parameters— E-mail/Text Message Device—Device No. 1, 2, 3—E-mail Address
These parameters require an activation key (KX-NSU2xx) to function. If these items are programmed
in Off-line mode, but the PBX does not have the required activation key installed, the values specified
for these parameters will be cleared when the data is uploaded to the PBX.
PC Programming Manual 29
1.2.2 PC Programming Using Off-line Mode
To Next Page
Loading...
