Fault: The port is not communicating with the network.
Maintenance Console Location
9.14 PBX Configuration—[1-1] Configuration—Slot—V-IPEXT—Port Property
Feature Guide References
5.2.1 IP Proprietary Telephone (IP-PT)
Headset OFF/ON
Turns on or off the use of a headset with the IP-PT.
Value Range
Headset OFF, Headset ON
Maintenance Console Location
9.14 PBX Configuration—[1-1] Configuration—Slot—V-IPEXT—Port Property
Feature Guide References
5.2.1 IP Proprietary Telephone (IP-PT)
2.11.4 Headset Operation
C.Waiting with Headset
Selects the Call Waiting tone generating device when using a headset. This setting is displayed when "Headset
ON" is selected for Headset OFF/ON.
Value Range
PT Tone, Headset
Maintenance Console Location
9.14 PBX Configuration—[1-1] Configuration—Slot—V-IPEXT—Port Property
Feature Guide References
5.2.1 IP Proprietary Telephone (IP-PT)
Ringing Tone
Selects the dual-tone switching pattern of the ring tone for incoming calls.
Value Range
A: 64 ms (697 Hz), 64 ms (852 Hz)
B: 32 ms (697 Hz), 32 ms (852 Hz)
C: 128 ms (697 Hz), 128 ms (852 Hz)
D: 32 ms (697 Hz), 96 ms (852 Hz)
308 PC Programming Manual
9.14 PBX Configuration—[1-1] Configuration—Slot—V-IPEXT—Port Property
To Next Page
Loading...
