Maintenance Console Location
9.14 PBX Configuration—[1-1] Configuration—Slot—V-IPEXT—Port Property
Feature Guide References
5.2.1 IP Proprietary Telephone (IP-PT)
IP Codec Priority
Specifies the codec used for compression and decompression of transmitted data.
Some codecs may become unavailable depending on the value set here, as follows:
– When G.722 is selected, the priority is G.722 ® G.711 ® G.729A.
– When G.711 is selected, the priority is G.711 ® G.729A (G.722 is unavailable).
– When G.729A is selected, both G.711 and G.722 are unavailable.
Value Range
G.711, G.729A, G.722
Maintenance Console Location
9.14 PBX Configuration—[1-1] Configuration—Slot—V-IPEXT—Port Property
Feature Guide References
5.2.1 IP Proprietary Telephone (IP-PT)
Packet Sampling Time (G.711/G.722)
Specifies the time interval between measurements (samples) of sound data during a conversation.
The smaller this number, the higher the quality of the transmitted sound.
Value Range
20 ms, 30 ms, 40 ms, 60 ms
Maintenance Console Location
9.14 PBX Configuration—[1-1] Configuration—Slot—V-IPEXT—Port Property
Feature Guide References
5.2.1 IP Proprietary Telephone (IP-PT)
Packet Sampling Time (G.729A)
Specifies the time interval between measurements (samples) of sound data during a conversation.
The smaller this number, the higher the quality of the transmitted sound.
Value Range
20 ms, 30 ms, 40 ms, 60 ms
PC Programming Manual 309
9.14 PBX Configuration—[1-1] Configuration—Slot—V-IPEXT—Port Property
To Next Page
Loading...
