Maintenance Console Location
9.14 PBX Configuration—[1-1] Configuration—Slot—V-IPEXT—Port Property
Feature Guide References
5.2.1 IP Proprietary Telephone (IP-PT)
Announce Mode
Specifies if the extension’s built-in ANNOUNCE feature is enabled. A KX-NT265, KX-NT300 series, or
KX-NT500 series phone in a remote location with ANNOUNCE enabled can provide the PBX’s IP Address
information to other terminals in the remote location in place of manually programming the PBX’s IP address
at each terminal.
Value Range
Enable, Disable
Maintenance Console Location
9.14 PBX Configuration—[1-1] Configuration—Slot—V-IPEXT—Port Property
Feature Guide References
5.2.1 IP Proprietary Telephone (IP-PT)
Voice
The Shelf, Slot, and Port for each item are displayed for your reference. For details, see Common
Programming Reference Items in 9.1 PBX Configuration—[1-1] Configuration—Slot.
Extension Number
Specifies the extension number of the port.
Value Range
Max. 5 digits (consisting of 0–9)
Maintenance Console Location
9.14 PBX Configuration—[1-1] Configuration—Slot—V-IPEXT—Port Property
Feature Guide References
5.2.1 IP Proprietary Telephone (IP-PT)
Extension Name
Specifies the extension name of the port.
Value Range
Max. 20 characters
310 PC Programming Manual
9.14 PBX Configuration—[1-1] Configuration—Slot—V-IPEXT—Port Property
To Next Page
Loading...
