Panasonic KX-NS500 - Page 436

Feature Guide References
2.6.3 Last Number Redial
Automatic Redial—Analogue CO Mute / Busy Detection Timer (s)
Specifies the length of time before the PBX stops muting the caller’s voice and cancels busy tone detection
when Automatic Redial to analogue trunk is performed.
Value Range
0–15 s
Maintenance Console Location
10.3 PBX Configuration—[2-3] System—Timers & Counters
Feature Guide References
2.6.3 Last Number Redial
Dial—Hot Line (Pickup Dial) Start (s)
Specifies the length of time between going off-hook and the start of automatic dialling when the Hot Line feature
is set.
Value Range
0–15 s
Maintenance Console Location
10.3 PBX Configuration—[2-3] System—Timers & Counters
Feature Guide References
2.6.6 Hot Line
Dial—Extension First Digit (s)
Specifies the length of time after going off-hook within which the first digit of a feature number or destination
must be dialled before a reorder tone is heard.
Value Range
1–250 s
Maintenance Console Location
10.3 PBX Configuration—[2-3] System—Timers & Counters
Feature Guide References
2.5.2 Automatic Extension Release
436 PC Programming Manual
10.3 PBX Configuration—[2-3] System—Timers & Counters