PC Programming Manual References
17.1 PBX Configuration—[9-1] Private Network—TIE Table
Feature Guide References
4.2.1 TIE Line Service
PT Display—PT Last Display Duration in Idle Mode (s)
Specifies the length of time that the current information remains on the display after the extension returns to
idle status.
Value Range
1–15 s
Maintenance Console Location
10.3 PBX Configuration—[2-3] System—Timers & Counters
Air Synchronisation—Watching Degeneracy (x60s)
Specifies the length of time that a Slave CS can maintain an ongoing call after air synchronisation is lost.
Value Range
60 ´ n (n=0–300) s
Maintenance Console Location
10.3 PBX Configuration—[2-3] System—Timers & Counters
PC Programming Manual References
19.3 PBX Configuration—[11-3] Maintenance—Air Synchronisation
Voice Mail (Caller from VM to CO)—On-hook Wait Time (s)
Specifies the length of time from when the voice mail seizes a trunk (for example, to transfer a call) until the
voice mail goes on hook. If the time specified here is too short, the voice mail will be unable to dial the number
and make a connection.
Value Range
1–30 s
Maintenance Console Location
10.3 PBX Configuration—[2-3] System—Timers & Counters
Feature Guide References
3.1.1 Unified Messaging System Overview
450 PC Programming Manual
10.3 PBX Configuration—[2-3] System—Timers & Counters
To Next Page
Loading...
