Panasonic KX-NS500 - Page 621

Value Range
Max. 4 digits (consisting of 0–9, *, #, and P [pause])
Maintenance Console Location
11.12.1 PBX Configuration—[3-12-1] Group—VM (DTMF) Group—System Settings
VM DTMF Status Signal—Answer
Specifies the DTMF status signal the PBX sends to the VPS when the called extension has answered the call.
Value Range
Max. 4 digits (consisting of 0–9, *, #, and P [pause])
Maintenance Console Location
11.12.1 PBX Configuration—[3-12-1] Group—VM (DTMF) Group—System Settings
VM DTMF Status Signal—Confirm
Specifies the DTMF status signal the PBX sends to the VPS when a certain feature (e.g., Message Waiting)
has been successfully set or cancelled on an extension.
Value Range
Max. 4 digits (consisting of 0–9, *, #, and P [pause])
Maintenance Console Location
11.12.1 PBX Configuration—[3-12-1] Group—VM (DTMF) Group—System Settings
VM DTMF Status Signal—Disconnect
Specifies the DTMF status signal the PBX sends to the VPS when the caller hangs up.
Value Range
Max. 4 digits (consisting of 0–9, *, #, and P [pause])
Maintenance Console Location
11.12.1 PBX Configuration—[3-12-1] Group—VM (DTMF) Group—System Settings
VM DTMF Status Signal—FWD to VM Ringback Tone
Specifies the DTMF status signal the PBX sends to the VPS when the call has been forwarded to the VPS and
the PBX is calling another port of the VPS.
Value Range
Max. 4 digits (consisting of 0–9, *, #, and P [pause])
PC Programming Manual 621
11.12.1 PBX Configuration—[3-12-1] Group—VM (DTMF) Group—System Settings