Maintenance Console Location
11.12.1 PBX Configuration—[3-12-1] Group—VM (DTMF) Group—System Settings
VM DTMF Status Signal—FWD to VM Busy Tone
Specifies the DTMF status signal the PBX sends to the VPS when the call has been forwarded to the VPS and
all ports of the VPS are busy.
Value Range
Max. 4 digits (consisting of 0–9, *, #, and P [pause])
Maintenance Console Location
11.12.1 PBX Configuration—[3-12-1] Group—VM (DTMF) Group—System Settings
VM DTMF Status Signal—FWD to Extension Ringback Tone
Specifies the DTMF status signal the PBX sends to the VPS when the call has been forwarded to another
extension and the PBX is calling the destination extension.
Value Range
Max. 4 digits (consisting of 0–9, *, #, and P [pause])
Maintenance Console Location
11.12.1 PBX Configuration—[3-12-1] Group—VM (DTMF) Group—System Settings
VM DTMF Command—Recording Message
Specifies the DTMF command the PBX sends to the VPS when a call is forwarded, intercepted, or transferred
to the VPS, so that the caller can leave a message in a certain mailbox.
Value Range
Max. 16 digits (consisting of 0–9, *, #, H [mailbox number], and P [pause])
Maintenance Console Location
11.12.1 PBX Configuration—[3-12-1] Group—VM (DTMF) Group—System Settings
VM DTMF Command—Listening Message
Specifies the DTMF command the PBX sends to the VPS when an extension user answers a message waiting
notification from the VPS, so that the extension user can retrieve a new message in a certain mailbox without
having to dial the mailbox number manually.
Value Range
Max. 16 digits (consisting of 0–9, *, #, H [mailbox number], and P [pause])
Maintenance Console Location
11.12.1 PBX Configuration—[3-12-1] Group—VM (DTMF) Group—System Settings
622 PC Programming Manual
11.12.1 PBX Configuration—[3-12-1] Group—VM (DTMF) Group—System Settings
To Next Page
Loading...
