Panasonic KX-NS500 - Page 623

Feature Guide References
2.20.1 Message Waiting
VM DTMF Command—Switching to AA
Specifies the DTMF command the PBX sends to the VPS to switch from VM Service Mode to AA Service Mode.
Value Range
Max. 16 digits (consisting of 0–9, *, #, H [mailbox number], and P [pause])
Maintenance Console Location
11.12.1 PBX Configuration—[3-12-1] Group—VM (DTMF) Group—System Settings
VM DTMF Command—Switching to VM
Specifies the DTMF command the PBX sends to the VPS to switch from AA Service Mode to VM Service Mode.
Value Range
Max. 16 digits (consisting of 0–9, *, #, H [mailbox number], and P [pause])
Maintenance Console Location
11.12.1 PBX Configuration—[3-12-1] Group—VM (DTMF) Group—System Settings
Timing—DTMF Length for VM
Specifies the length of DTMF signals the PBX sends to the VPS.
Value Range
80 ms, 160 ms
Maintenance Console Location
11.12.1 PBX Configuration—[3-12-1] Group—VM (DTMF) Group—System Settings
Timing—Inter-digit Time
Specifies the length of pause time between DTMF signals the PBX sends to the VPS.
Value Range
80 ms, 160 ms
Maintenance Console Location
11.12.1 PBX Configuration—[3-12-1] Group—VM (DTMF) Group—System Settings
Timing—Waiting Time before Sending Follow on ID
Specifies the length of time that the PBX waits before sending the Follow on ID to the VPS after the VPS has
answered a call.
PC Programming Manual 623
11.12.1 PBX Configuration—[3-12-1] Group—VM (DTMF) Group—System Settings