Feature Guide References
5.1.4 Time Service
Parameter Selection (for TRS Level Change)
Specifies the TRS/Barring level to be used temporarily on a certain PS.
Value Range
Level 1–Level 7
Maintenance Console Location
12.2.3 PBX Configuration—[4-2-3] Extension—Portable Station—Flexible Button
Feature Guide References
2.7.1 Toll Restriction (TRS)/Call Barring (Barring)
2.7.4 Dial Tone Transfer
Parameter Selection (for Time Service - Automatic/Manual)
Specifies the Time Table to be used when the Time Service Switching Mode is set to Automatic.
Value Range
Table 1–Table 8
Maintenance Console Location
12.2.3 PBX Configuration—[4-2-3] Extension—Portable Station—Flexible Button
Feature Guide References
5.1.4 Time Service
Parameter Selection (for SDN)
Specifies the delayed ringing setting for calls arriving at an SDN button.
The value specified here is only used when System Wireless—SDN Delayed Ringing with LCD on
10.9 PBX Configuration—[2-9] System—System Options is set to "Enable".
Value Range
Immediate, 1 Ring, 2 Rings, 3 Rings, 4 Rings, 5 Rings, 6 Rings, No Ring
Maintenance Console Location
12.2.3 PBX Configuration—[4-2-3] Extension—Portable Station—Flexible Button
PC Programming Manual References
10.9 PBX Configuration—[2-9] System—System Options—Option 4— System Wireless—SDN Delayed
Ringing with LCD
PC Programming Manual 713
12.2.3 PBX Configuration—[4-2-3] Extension—Portable Station—Flexible Button
To Next Page
Loading...
