Feature Guide References
2.9.1 Primary Directory Number (PDN)/Secondary Directory Number (SDN) Extension
Extension Number (for DSS)
Specifies the number of an extension to be accessed.
Value Range
Max. 5 digits (consisting of 0–9)
Maintenance Console Location
12.2.3 PBX Configuration—[4-2-3] Extension—Portable Station—Flexible Button
Extension Number (for ICD Group)
Specifies the floating extension number of an incoming call distribution group to be accessed.
Value Range
Max. 5 digits (consisting of 0–9)
Maintenance Console Location
12.2.3 PBX Configuration—[4-2-3] Extension—Portable Station—Flexible Button
Extension Number (for Message Waiting)
Specifies the number of an extension or floating extension number of an incoming call distribution group for
which messages are checked. If this cell is left empty, the PS will check its own messages only.
Value Range
Max. 5 digits (consisting of 0–9)
Maintenance Console Location
12.2.3 PBX Configuration—[4-2-3] Extension—Portable Station—Flexible Button
Extension Number (for Group Fwd (Both))
Specifies the floating extension number of an incoming call distribution group for which both intercom and trunk
calls are forwarded.
Value Range
Max. 5 digits (consisting of 0–9)
Maintenance Console Location
12.2.3 PBX Configuration—[4-2-3] Extension—Portable Station—Flexible Button
714 PC Programming Manual
12.2.3 PBX Configuration—[4-2-3] Extension—Portable Station—Flexible Button
To Next Page
Loading...
