Extension Name
Indicates the name of the extension, when an extension number is specified (reference only).
Value Range
Max. 20 characters
Maintenance Console Location
12.3 PBX Configuration—[4-3] Extension—DSS Console
Dial (for One-touch)
Specifies the number to be dialled. The PBX can have a maximum of 2000 One-touch Dialling buttons for
extensions and DSS Consoles.
Value Range
Max. 32 digits (consisting of 0–9, *, #, T [Transfer], [ ] [Secret], P [Pause], and F [Flash])
Maintenance Console Location
12.3 PBX Configuration—[4-3] Extension—DSS Console
Feature Guide References
2.6.2 One-touch Dialling
Dial (for ISDN Service)
Specifies the number required to access the telephone company’s ISDN service.
Value Range
Max. 32 digits (consisting of 0–9, *, #, T [Transfer], [ ] [Secret], P [Pause], and F [Flash])
Maintenance Console Location
12.3 PBX Configuration—[4-3] Extension—DSS Console
Feature Guide References
4.1.2.10 ISDN Service Access by Keypad Protocol
Dial (for NDSS)
Specifies the network extension number of the extension to be accessed using Network Direct Station
Selection. Note that only extension numbers that have been previously registered in 17.4 PBX
Configuration—[9-4] Private Network—NDSS Key Table can be specified here.
Value Range
Max. 16 digits (consisting of 0–9, *, #, T [Transfer], [ ] [Secret], P [Pause], and F [Flash])
732 PC Programming Manual
12.3 PBX Configuration—[4-3] Extension—DSS Console
To Next Page
Loading...
