Panasonic KX-NS500 - Page 733

Maintenance Console Location
12.3 PBX Configuration—[4-3] Extension—DSS Console
Feature Guide References
4.2.5.1 Network Direct Station Selection (NDSS)
Optional Parameter (Ringing Tone Type Number) (for Time Service)
Specifies the Time Table to be used for changing time modes in the Automatic Switching mode.
Value Range
1-8
Maintenance Console Location
12.3 PBX Configuration—[4-3] Extension—DSS Console
Feature Guide References
5.1.4 Time Service
Optional Parameter (Ringing Tone Type Number) (for Loop CO, Single CO,
Group CO, ICD Group, SDN)
Specifies the ring tone type.
Value Range
KX-DT300 series (except KX-DT321)/KX-T7600 series (except KX-T7665)/IP-PT (except KX-NT265/
KX-NT321): 1–30
KX-DT321/KX-T7665/KX-NT265/KX-NT321: 1–8 (Even if ring tone 9–30 is selected, ring tone 1 is heard.)
Other telephones: 1–8 (Even if ring tone 9–30 is selected, ring tone 2 is heard.)
Maintenance Console Location
12.3 PBX Configuration—[4-3] Extension—DSS Console
Optional Parameter (Ringing Tone Type Number) (for Call Park)
Specifies the number of the parking zone a call is to be parked in when a Call Park button with Parameter
Selection (for Call Park) on this screen set to Specific is pressed.
Value Range
0-99
Maintenance Console Location
12.3 PBX Configuration—[4-3] Extension—DSS Console
PC Programming Manual 733
12.3 PBX Configuration—[4-3] Extension—DSS Console