CLIP Table No.
Sets the CLIP numbers established for each extension (wired/wireless) of a carrier. The CLIP IDs for each
CLIP number are set in 12.1.7 PBX Configuration—[4-1-7] Extension—Wired Extension—CLIP ID
Table and 12.2.5 PBX Configuration—[4-2-5] Extension—Portable Station—CLIP ID Table.
Value Range
1–8
Maintenance Console Location
16.5 PBX Configuration—[8-5] ARS—Carrier
Feature Guide References
2.8.1 Automatic Route Selection (ARS)
Carrier Access Code
Specifies the carrier access code. The carrier access code can be added to the user-dialled number by
specifying "C" in
Modify Command on this screen.
Value Range
Max. 32 digits (consisting of 0–9, *, #, and P [Pause])
Maintenance Console Location
16.5 PBX Configuration—[8-5] ARS—Carrier
Feature Guide References
2.8.1 Automatic Route Selection (ARS)
TRG Priority
Selects the order in which trunk groups are seized when making calls via each carrier.
Trunk Group—Priority 1–Priority 4
Specifies which trunk group is seized in the order of priority 1 to priority 4.
Value Range
None, 1–64
Maintenance Console Location
16.5 PBX Configuration—[8-5] ARS—Carrier
Feature Guide References
2.8.1 Automatic Route Selection (ARS)
PC Programming Manual 795
16.5 PBX Configuration—[8-5] ARS—Carrier
To Next Page
Loading...
