Panasonic KX-NS500 - Page 872

Maintenance Console Location
20.1.2 UM Configuration—[1-2] Mailbox Settings—Full Setting—External MSG Delivery/Auto FWD/Personal
Custom Serv
Feature Guide References
3.2.1.2 Auto Forwarding
Auto Forwarding Mode - Message Remains New
Specifies if the forwarded messages remain marked as new. This setting is available only when
Auto
Forwarding Mode is set to "Copy".
Value Range
Yes, No
Maintenance Console Location
20.1.2 UM Configuration—[1-2] Mailbox Settings—Full Setting—External MSG Delivery/Auto FWD/Personal
Custom Serv
Feature Guide References
3.2.1.2 Auto Forwarding
Auto Forwarding Expires
Specifies the date and time of day for when forwarding of messages will expire.
Value Range
Date and time
Maintenance Console Location
20.1.2 UM Configuration—[1-2] Mailbox Settings—Full Setting—External MSG Delivery/Auto FWD/Personal
Custom Serv
Feature Guide References
3.2.1.2 Auto Forwarding
Personal Custom Service
Specifies the Personal Custom Service. The System Administrator can assign an operation to each key.
Note
• These settings can be changed by subscribers.
• Make sure to add a trunk access number when you store an outside telephone number.
• When the Unified Messaging system calls a trunk via the PRI card, be sure to add "#" after the telephone
number (1112223333 in the example here): 9P1112223333#PP123PP456PPX# (P: Dial Pause)
Follow the steps below to edit a Personal Custom Service.
872 PC Programming Manual
20.1.2 UM Configuration—[1-2] Mailbox Settings—Full Setting