Maintenance Console Location
20.1.2 UM Configuration—[1-2] Mailbox Settings—Full Setting—Remote Call/Automatic Login/Direct Service
PC Programming Manual References
21.1 UM Configuration—[2] Class of Service— Call Transfer to Outside
Feature Guide References
3.2.2.26 Remote Call Forwarding Set
Auto Login Extension
When this item is set to "Enable", subscribers are able to access their mailbox directly without entering the
mailbox number. Subscribers can automatically log in from their extensions, by calling from an outside
telephone whose number is stored as a Caller ID number, or by dialling a telephone number assigned to a
specified DID number or trunk. When logging in from outside telephones, the Toll Saver feature is also
available.
Value Range
Disable, Enable
Maintenance Console Location
20.1.2 UM Configuration—[1-2] Mailbox Settings—Full Setting—Remote Call/Automatic Login/Direct Service
Feature Guide References
3.2.2.2 Automatic Login
Auto Login Extension Password Entry Requirement
Specifies if a password is required for the Automatic Login Extension feature.
Notice
If this is set to "No", ensure that unauthorised third-parties are not allowed access to that mailbox.
Value Range
Yes, No
Maintenance Console Location
20.1.2 UM Configuration—[1-2] Mailbox Settings—Full Setting—Remote Call/Automatic Login/Direct Service
Feature Guide References
3.2.2.2 Automatic Login
876 PC Programming Manual
20.1.2 UM Configuration—[1-2] Mailbox Settings—Full Setting
To Next Page
Loading...
