Maintenance Console Location
24.4 UM Configuration—[5-4] System Parameters—Parameters
System Guidance—Select Language—# Announcement Mode
Specifies the way of announcement for the "#" character when "US-English" or "English (UK)" is selected as
System Guidance.
Value Range
POUND, HASH
Maintenance Console Location
24.4 UM Configuration—[5-4] System Parameters—Parameters
PBX Parameters
Specifies how the system will initiate and control call transfers, setup outgoing calls, and control message
waiting lamps on extensions.
PBX Environment—Operator Transfer Sequence (Up to 16 digits / [0-9 * # D R F
T X , ;])
Specifies the sequence for transferring calls to an operator’s extension.
Value Range
Max. 16 digits consisting of 0–9,
, # and special codes
D: Disconnecting
F: Flash (Recall)
R: Ringback Tone Detection
T: Dial Tone Detection
, : Dial Pause (default 1 s)
; : Dial Pause (default 3 s)
X: Extension Dialling
0–9, , #: Dial Code
Maintenance Console Location
24.4 UM Configuration—[5-4] System Parameters—Parameters
PBX Environment—Extension Transfer Sequence (Up to 16 digits / [0-9 * # D R
F T X , ;])
Specifies the sequence for transferring calls to any extension except an operator’s extension.
Value Range
Max. 16 digits consisting of 0–9, , # and special codes
D: Disconnecting
F: Flash (Recall)
R: Ringback Tone Detection
T: Dial Tone Detection
PC Programming Manual 953
24.4 UM Configuration—[5-4] System Parameters—Parameters
To Next Page
Loading...
