3 Features C
Features 3-25
Conditions • Same as the conditions of Call Forwarding – All Calls.
• It is programmable to enable or disable this feature on Class of Service
basis.
Programming References
Section 4, System Programming,
[005] Flexible CO Button Assignment
[100] Flexible Numbering, Call forwarding / do not disturb set / cancel
[991] COS Additional Information, Field (2)
Station Programming.......................................................User Manual,
Flexible Button Assignment – FWD / DND Button
Feature References Section 3, Features,
Call Forwarding – All Calls
Operation References DPT Features, SLT Features;
—User Manual Call Forwarding — Follow Me
Call Forwarding – No Answer
Description Calls to your extension are forwarded to another extension if you
do not answer the call in a pre-determined time.
Conditions • Types of calls which are forwarded by this function are:
Outside calls – DIL 1:1; Intercept Routing
Intercom calls – Extension; Transfer
• This function operates if an incoming call is not answered in a specific
period of time. Therefore, this function also applies if your extension is
busy and cannot answer the incoming call within the time.
• There can only be one stage of Call Forwarding if a call is forwarded to
a station which is also in Call Forwarding. In this case, Station Hunting
is activated for the forwarded call.
• Although calls are forwarded, Message Waiting is not. The MESSAGE
button indicator is lit on the originally called extension.
• If an extension in Call Forwarding is also in a Hunt group, a call
directed to the extension is forwarded. Station Hunting still applies for
calls directed to other extensions in the Hunt group.
• Setting this function cancels other Call Forwarding or Do Not Disturb
functions, if any.
• A Floating Station cannot be programmed as the forwarded destination.
• No Answer timer is activated in the following cases:
Busy Station Signaling (BSS)
While the caller hears dial tone
To Next Page
Loading...
