4.5 TRS / ARS Programming
ARS Modify Removed Digit
330
System Programming 4-79
Description Determines how the dialed number should be modified before
sending to the central office. You can delete the digits from the
beginning of the dialed number.
Selection
• Modification table number: 1 through 8
• Number of digits to be deleted: 0 through 9 (0=no deleting)
Default All modification tables – 0
Programming 1. Enter 330.
Display: ARS Modify Remov
2. Press NEXT.
Display: Modify Table?->
3. Enter a modification table number.
To enter table number 1, you can also press NEXT.
Display example: 1:0
4. Enter the number of digits to be deleted.
To change the current entry, enter the new number.
5. Press STORE.
6. To program another modification table, press NEXT or
PREV, or SELECT and the desired modification table
number.
7. Repeat steps 4 through 6.
8. Press END.
Conditions There is a maximum of eight Modification Tables. Each table has a 1-
digit number of digits to be deleted.
Feature References Section 3, Features,
Automatic Route Selection (ARS)
To Next Page
Loading...
Need help?
General
