Panasonic KX-T30865 - Pause Insertion, Automatic

P 3 Features
3-94 Features
• When the SLT is in operation, the display and LED indicator on the
paired DPT will show in the same way as if the DPT is in operation.
• If eXtra Device Port feature is available, a DPT+ SLT can act as
completely different extensions.
• Call Waiting tone can be heard only by DPT.
Connection References
Section 2, Installation,
2.3.4 Paralleled Telephone Connection
Programming References
Section 4, System Programming,
[100] Flexible Numbering, Parallel telephone mode set / cancel
Feature References Section 3, Features,
EXtra Device Port (XDP)
Operation References DPT Features, SLT Features;
—User Manual Paralleled Telephone Connection
Pause Insertion, Automatic
Description This function is used to insert a pre-assigned pause between the
CO line access number, the host PBX, or carrier access code and
the successively dialed digits.
Conditions • This feature requires previous programming of CO line access number
and host PBX access codes as well as assignment of the pause duration.
• This feature works for Speed Dialing, One-Touch Dialing, Last
Number Redial, Saved Number Redial, Pickup Dialing, Call
Forwarding – to CO Line as well as for ordinary calls.
• Pressing the PAUSE button in dialing number inserts a pause for a
pre-assigned time.
Programming References
Section 4, System Programming
[100] Flexible Numbering, Automatic line access / ARS, CO line group
line access
[411] Host PBX Access Codes
[412] Pause Time
Feature References Section 3, Features,
Host PBX Access Toll Restriction
Operation References Not applicable.