4.8 Extension Programming
ISDN DDI Number / Extension Number Transformation
610
System Programming 4-125
Description Used to convert a DDI number to an extension number in order to
put an incoming DDI call to a specific extension.
Selection • Jack number: KX-TD816 – 01 through 16, (-1 / -2),
KX-TD1232 – 01 through 64, (-1 / -2),
(-1 = first part, -2 = second part)
• DDI Number: 1 through 6 digits
Default All jacks – Not stored
Programming 1. Enter 610.
Display: DDI No. Trans
2. Press NEXT.
Display: Jack NO?–>
3. Enter a jack number.
To enter jack number 01, you can also press NEXT.
To select the second part (-2), press NEXT after entering a jack
number.
Display: #01-1:001
4. Enter a DDI number.
To delete the current entry, press CLEAR.
5. Press STORE.
6. To program another jack, press NEXT or PREV, or
SELECT and the desired jack number.
7. Repeat steps 4 through 6.
8. Press END.
Conditions • There is a maximum of 128 DDI numbers. Each DDI number can be
one through six digits, consisting of 0 through 9.
• In the case of KX-TD1232, jack numbers 01 through 32 are for the
Master System and 33 through 64 are for the Slave, if available.
• For an explanation of jack numbering, see “Rotation of jack number”
on page 4-7.
Feature References Section 3, Features,
Direct Dialing In (DDI)
To Next Page
Loading...
