4.4 Timer Programming
Transfer Recall Time
System Programming 4-57
201
Description Sets the number of rings before the transfer recall occurs. If a
transferred call is not answered before the programmed time of
rings, the call returns to the original caller.
Selection Number of rings: 3 through 48
Default 12 rings
Programming 1. Enter 201.
Display: Transfer Recall
2. Press NEXT.
Display example: Time:12 rings
3. Enter the number of rings.
To change the current entry, press CLEAR and the new number of
rings.
4. Press STORE.
5. Press END.
Conditions • One ring is equivalent to five seconds.
• You cannot leave the entry empty.
Feature References Section 3, Features,
Call Transfer, Unscreened – to Extension
To Next Page
Loading...
