4.4 Timer Programming
Intercept Time
System Programming 4-59
203
Description Sets the number of rings for the Intercept Routing – No Answer
(IRNA) feature. If a call is not answered before the programmed
number of rings, the call is redirected to the programmed station.
Selection Number of rings: 3 through 48
Default 12 rings
Programming 1. Enter 203.
Display: Intercept Time
2. Press NEXT.
Display example: Time: 12 rings
3. Enter the number of rings.
To change the current entry, press CLEAR and the new number of
rings.
4. Press STORE.
5. Press END.
Conditions • One ring is equivalent to five seconds.
• Programs [409]–[410] “Intercept Extension — Day / Night” are used to
program the destination of Intercept Routing on a CO line group basis
in day and night modes.
• If the original extension has set Call Forwarding – No Answer,
Intercept Timer starts after the Call Forwarding.
• You cannot leave the entry empty.
Feature References Section 3, Features,
Intercept Routing
To Next Page
Loading...
Need help?
General
