3 Features H
Features 3-69
Handsfree Answerback
Description Allows the speakerphone telephone user to talk to a caller without
lifting the handset, if the user has set handsfree answerback mode.
If the user receives an intercom call in the mode, handsfree
conversation is established immediately after the user hears beep
tone and the caller hears confirmation tone.
Conditions • Handsfree answerback mode is set or cancelled by pressing the AUTO
ANSWER button.
• This feature does not work for calls from outside parties or doorphone
calls.
• Handsfree Answerback set on a telephone overrides the Ring / Voice
Intercom Alerting mode preset on the telephone; Handsfree
conversation mode is established as soon as confirmation tone is sent.
Programming Reference
No programming required.
Feature References Section 3, Features,
Alternate Calling – Ring / Voice
Operation References DPT Features,
—User Manual Handsfree Answerback
Handsfree Operation
Description Allows the digital proprietary telephone user to dial and to talk to
the other party without lifting the handset. Pressing an appropriate
button provides handsfree mode.
Conditions • This function can be utilized by pressing a button listed below when
the SP-PHONE / MONITOR button indicator is off:
SP-PHONE button; MONITOR button; INTERCOM button; CO
button
• The KX-T7250 can be used for handsfree dialing operations, etc., but
cannot be used for handsfree conversation.
• A single press of a One-Touch Button, DSS button, REDIAL button or
a SAVE button also provides handsfree mode if Full One-Touch
Dialing is enabled.
Programming References
No programming required.
To Next Page
Loading...
