LM 3 Features
3-82 Features
Station Programming.......................................................User Manual
Flexible Button Assignment – Group-CO (G-CO) Button, Loop-CO (L-
CO) Button, Single-CO (S-CO) Button
Preferred Line Assignment – Outgoing
Feature References Section 3, Features,
CO Line Connection Assignment – Outgoing
Operation References Basic Operation,
—User Manual Making Calls
Lockout
Description If one party in a conversation goes on-hook, they are both
disconnected from the speech path automatically. This feature
applies to extension and outside calls. Reorder tone is sent to the
off-hook party before it is disconnected.
Conditions In the case of a single line telephone (SLT), if nothing is dialled within a
certain period of time after the other party goes on-hook, reorder tone is
sent to the SLT and then it is disconnected from the speech path.
Programming References
No programming required.
Feature References None
Operation References DPT Features, SLT Features;
—User Manual Lockout
Manager Extension
Description One extension in the system can be assigned as the system
manager. This extension can perform system programming.
Conditions • Besides the manager extension, the extension that is connected to the
jack 1 is able to perform system programming.
• If eXtra Device Port mode is enabled at the manager extension, the
digital proprietary telephone user is regarded as the manager.
Programming References
Section 4, System Programming,
[006] Operator / Manager Extension Assignment
To Next Page
Loading...
