C 3 Features
3-40 Features
CO Incoming Call Information Display
Description Provides the display proprietary telephone user with the preset CO
line name if an incoming outside call arrives at the telephone. If
the CO name is not assigned and the CO line is an ISDN S0 line
provided with CLIP (Calling Line Identification Presentation)
feature, shows the caller’s telephone number and name on the
display.
Conditions • It is required to give names to CO lines by system programming.
• With the CLIP feature, the ISDN S0 line informs the system of the
caller’s telephone number only. To display the name, the system
compares the informed number with the System Speed Dialing
Numbers stored in program [001] and if a match is found, decides the
caller’s name by using the System Speed Dialling Names stored in
program [002].
• The display of CO line name has the precedence on the operator’s
telephone.
• The display DPT (KX-T7230 or KX-T7235) user can record the
information of the call received by CLIP feature (CO Incoming Call
Information Log feature).
Connection References
Section 2, Installation,
2.4.2 CO Line Connection (KX-TD1232 : CO 1 through CO 8)
2.4.7 2-ISDN S0 Line Unit Connection
Programming References
Section 4, System Programming,
[001] System Speed Dialing Number Set
[002] System Speed Dialing Name Set
[416] ISDN Line Number Assignment
[417] ISDN Outgoing CLIR Service Assignment
[419] CO Line Name Assignment
Feature References Section 3, Features,
Calling Line Identification Restriction (CLIR)
CO Incoming Call Information Log
Operation Reference DPT Features,
—User Manual CO Incoming Call Information Display
To Next Page
Loading...
