4.3 System Programming
Adjust Time
System Programming 4-49
115
Description Used to set the time for checking the normality of the system.
Every day at the programmed time, system data is checked. If an
error is checked, it is recorded onto error log.
Selection • Hour: 1 through 12
• Minute: 00 through 59
• AM / PM
Default 1:00 AM
Programming 1. Enter 115.
Display: Adjust Time
2. Press NEXT to program hour.
Display example: 1:00 AM
3. Enter the hour.
To change the current entry, press CLEAR and the new hour.
4. Press to program minute.
5. Enter the Minute.
To change the current entry, enter the new minute.
6. Press to program AM / PM.
7. Press SELECT for AM or PM.
8. Press STORE.
9. Press END.
Conditions You cannot leave the entry empty.
Feature References None
To Next Page
Loading...
