4.10 Resource Programming
System Working Report Printout
815
4-136 System Programming
Description Starts or stops printing of the system working report.
Selection Start / Stop
Default Not applicable.
Programming 1. Enter 815.
Display: SWR Data Dump
2. Press NEXT.
Display: Print-Out:Start
3. Press STORE to start printing.
Printing starts.
To stop printing in the middle of printing, press SELECT and go to
step 4.
When printing is completed, the display shows:
Display: Print-Out:Finish
4. Press STORE.
Display: Print-Out:Stop
5. Press END.
Conditions • It is necessary to connect a printer to the EIA (RS-232C) port provided
on the system.
• After connecting a printer, do not press the RETURN key, if provided
on the printer, in 10 seconds. Otherwise, the usage of the EIA port is
changed to system programming and printout will not occur.
• You cannot restart the printout while records are being output.
Feature References Section 3, Features,
System Working Report
To Next Page
Loading...
