3 Features T
Features 3-117
Programming References
Section 4, System Programming,
[806]–[807] EIA (RS-232C) Parameters — Port 1/Port 2
[815] System Working Report Printout
[816] System Working Report Clear
Feature References Section 3, Features,
Station Message Detail Recording (SMDR)
Time-Out, Variable
Description Provides timers to control various features or functions.
The following timers are programmable:
System Timer Items Range
Automatic Redial Interval Time n
~10 s, n: 3 – 120
Automatic Redial Repeated Times 1 – 30 times
Call Forwarding – No Answer Time-Out 1 – 12 rings
CO Dial Starting Time n
~100 ms, n: 0 – 40
CO-to-CO Duration Time 1 – 64 min
Extension-to-CO Call Duration Time 1 – 64 min
Hold Recall Time 0 – 240 s
Intercept Routing Time-Out 3 – 48 rings
Message Waiting Ring Interval Time 0 – 64 min
Pickup Dialing Waiting Time 1 – 5 s
SMDR Duration Count Starting Time 0 – 60 s
Toll Restriction First Digit Time-Out 5 – 120 s
Toll Restriction Inter-digit Time-Out 5 – 30 s
Transfer Recall Time 3 – 48 rings
CO Line Group Timer Items
Disconnect Time 0.5 / 2.0 / 4.0 s
Register Recall Signal Time Disable / 80 / 96 / 112 /
200 / 300 / 400 / 500 /
600 / 700 / 800 / 900 /
1000 / 1100 / 1200 ms
Pause Time 1.5 / 2.5 / 3.5 / 4.5 s
CO Line Timer Items
CPC Signal Detection Time n
~8 ms, n: 02 – 75
(Incoming)
DTMF Digit Time 80 / 160 ms
To Next Page
Loading...
Need help?
General
