4.4 Timer Programming
Pickup Dial Waiting Time
4-60 System Programming
204
Description Sets the number of seconds for Pickup Dialing. If the telephone
user lifts the handset, the programmed party is called when the time
expires.
Selection Time (seconds): 1 through 5
Default 1 s
Programming 1. Enter 204.
Display: Pickup Dial Time
2. Press NEXT.
Display example: Time:1 sec
3. Enter the time.
To change the current entry, enter the new time.
4. Press STORE.
5. Press END.
Conditions This time gives the user an opportunity to dial digits before the automatic
dialing process takes place.
Feature References Section 3, Features,
Pickup Dialing
To Next Page
Loading...
