4.5 TRS/ARS Programming
Emergency Dial Set
311
System Programming 4-73
Description Stores up to 10 emergency call numbers.
Emergency numbers are not subject to toll restriction, Account
Code – Verified mode or Electronic Station Lockout.
Selection • Location number: 01 through 10
• Emergency number: 3 digits (max.)
Default Location 01= 114 / Location 02= 000
Programming 1. Enter 311.
Display: Emergency Dial
2. Press NEXT.
Display: Location NO?->
3. Enter a location number.
To enter location number 01, you can also press NEXT.
Display example: 01: 114
4. Enter an emergency number.
To delete the current entry, press CLEAR.
To change the current entry, press CLEAR and the new number.
5. Press STORE.
6. To program another location, press NEXT or PREV, or
SELECT and the desired location number.
7. Repeat steps 4 through 6.
8. Press END.
Conditions There is maximum of 10 emergency numbers. Each number has a
maximum of three digits, consisting of 0 through 9.
Feature References Section 3, Features,
Automatic Route Selection (ARS)
Toll Restriction
To Next Page
Loading...
