C 3 Features
3-36 Features *: Available for KX-TD1232 only.
Call Transfer, Screened – to Extension
Description Allows the extension user to voice-announce to the extension and
transfer the call.
Conditions None
Programming References
Section 4, System Programming,
[990] System Additional Information, Field (1)
Feature References None
Operation Reference DPT Features, SLT Features;
—User Manual Call Transfer — to Extension
Call Transfer, Unscreened – to Extension
Description Allows the user to transfer an intercom or outside call to directly
transfer to an extension party. After dialing the destination
extension, the user replaces the handset while hearing ringback
tone.
Conditions • If the destination party does not answer within the transfer recall time,
the call will return to the user or Operator 1. You can select the desired
one by system programming.
• This function is possible when the destination is sending ringback or
busy tone. If the destination is busy, Camp-On Transfer occurs.
• The ringing signal pattern follows the regular ringing pattern
depending on the party being transferred: outside or intercom call
ringing.
• It is possible for any extension user to transfer a call to the floating
modem.*
• If music on hold is enabled, music is sent to the caller while being
transferred. It is system-programmable whether to send ringback tone
or music on hold to the caller by program [990], Field (1).
Programming References
Section 4, System Programming,
[201] Transfer Recall Time
[990] System Additional Information, Fields (1), (11)
Feature References None